|
11-03-2006, 03:44 PM | #1 |
Registered User
Join Date: Aug 2003
Location: Simi Valley, CA
Posts: 1,383
|
Which clutch to use when switching to 26 spline input shaft?
Any suggestions?
Thanks, Jerome
__________________
03 Mach1 5spd BB/Stroker built by Eddie Rios Addiction Motorsports P&P 03 Heads by Al P Custom cams by NASVT Nazty PSR SAE 420rwhp SAE 387rwt 1.56 60ft 11.44ET 122.1mph 1700 DA |
11-03-2006, 03:46 PM | #2 |
Loud, fast and fun
Join Date: Apr 2004
Location: Owning Ricers at MIR
Posts: 7,864
|
Re: Which clutch to use when switching to 26 spline input shaft?
My recommendation is Mcleod, SPEC, Centerforce, RAM
In that order. I've had all 4 with my 26 spline TKO 600, I liked Mcleod the best |
11-03-2006, 07:38 PM | #3 |
Spool'n UP
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
|
Re: Which clutch to use when switching to 26 spline input shaft?
I got a Ram Powergrip 900HD.. Bad *** clutch for sure..
__________________
03 Dark Shadow Grey Mach1 "SMOKEY" "SLOW STREET CAR" Mods: Turbocharged 9 Sec. Slow Street Car |
11-03-2006, 07:44 PM | #4 |
1/4 Mile Drags Moderator
Join Date: Aug 2003
Location: Guntersville, AL
Posts: 2,630
|
Re: Which clutch to use when switching to 26 spline input shaft?
|
11-03-2006, 08:22 PM | #5 |
Registered User
Join Date: Jul 2005
Location: S.E. Mich.
Posts: 3,446
|
Re: Which clutch to use when switching to 26 spline input shaft?
Mcleod or Centerforce.
|
11-03-2006, 10:34 PM | #6 |
Registered User
Join Date: Oct 2004
Location: Fla.
Posts: 81
|
Re: Which clutch to use when switching to 26 spline input shaft?
Clutchmasters... St 2 pressure plate with a kevlar disc. Pedal pressure is about same as stock. It is very smooth and I beat the crap out of one with over 500rwhp and 10X26 slicks. It looked like new after 60 passes.
__________________
5.4 dohc Cobra. Boss330racing.com Home of the 2004 NMRA factory stock champion. |
11-03-2006, 11:36 PM | #7 |
Registered User
Join Date: May 2003
Location: midwest city,Ok
Posts: 1,666
|
Re: Which clutch to use when switching to 26 spline input shaft?
do you have any part #s for the Mcleod PP & disc ?
__________________
Rex Schuler '03 white Mach1-- born date 3/31/03 serial # 3243 bought on 4/19/03 personalized tag "MYSTANG" |
11-04-2006, 01:10 AM | #8 |
Spool'n UP
Join Date: Nov 2003
Location: DFW TX
Posts: 3,952
|
Re: Which clutch to use when switching to 26 spline input shaft?
I haven't heard about those clutches.. I know when I had my new motor built up I had my Ram full friction 900HD in there since last March and the pads still looked like they were new.. I wasn't making 500rwhp but I was making around 450 and 540tq and it never slipped on me at all. But it is a very aggressive clutch, off and on with no slip to it. It does take some time to learn how to drive with it around the city, traffic is a mofo with this clutch though I wouldn't but this one in for a daily if you're not racing it hard..
__________________
03 Dark Shadow Grey Mach1 "SMOKEY" "SLOW STREET CAR" Mods: Turbocharged 9 Sec. Slow Street Car |
11-04-2006, 12:49 PM | #9 |
Loud, fast and fun
Join Date: Apr 2004
Location: Owning Ricers at MIR
Posts: 7,864
|
Re: Which clutch to use when switching to 26 spline input shaft?
After 12 passes on my Centerforce DFX, there was nothing left of it.
|
11-05-2006, 11:16 AM | #10 | ||
Registered User
Join Date: Aug 2003
Location: Simi Valley, CA
Posts: 1,383
|
Re: Which clutch to use when switching to 26 spline input shaft?
Quote:
Quote:
Thanks guys. Jerome
__________________
03 Mach1 5spd BB/Stroker built by Eddie Rios Addiction Motorsports P&P 03 Heads by Al P Custom cams by NASVT Nazty PSR SAE 420rwhp SAE 387rwt 1.56 60ft 11.44ET 122.1mph 1700 DA |
||
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|