F/S: 99-01 Cobra Tails - 2003-04 Mach 1 Registry Owners Club

nasty04mach1 · 04-30-2008, 03:57 PM

I am selling my 99-01 Cobra tail lights. I always have them completely blacked out and if I am going to have them like that I might as well use the stock tail lights sale these and put that money to good use. The only time I had them tinted and showing the amber was when I first got them. I want to sell these and just put my stock ones back on. I can use the money to pay off some bills. The only thing about the lights is the outer most light housing has a dent in it on both sides. I got them from a buddy that had them tinted and he got a little too close with the heat gun. It is not that big of a deal to me. The only time you can tell is if you get up on them or if they are tinted. You cannot tell if they are untinted. You cannot tell in pictures as you can see from the many pictures I have posted of them on this site. I can leave them tinted for you or I can remove it. If you are going to tint them let me know and I can leave it on there so you do not have to buy any more tint. Other than the heat gun problem there is nothing wrong with them. They work perfect no cracks or anything. I will only take PayPal. I want to try and get $325 plus shipping. Thanks for looking and good luck!!! If you have any questions please send me a PM. BTW the tint is 20%.

In this pic I circled where the dent is from the heat gun.

nasty04mach1 · 04-30-2008, 04:50 PM

nasty04mach1 · 04-30-2008, 07:25 PM

Somebody has to got be wanting some Cobra tails?

bullitt784 · 04-30-2008, 09:05 PM

do you have the cobra harnesses?

nasty04mach1 · 04-30-2008, 11:08 PM

No I just used the stock harness. You do not have to have it to use them.

yinks281 · 04-30-2008, 11:21 PM

Quote:

Originally Posted by nasty04mach1

No I just used the stock harness. You do not have to have it to use them.

How did you hook up the amber???

swoop1156 · 04-30-2008, 11:28 PM

I don't think he had the Amber hooked up if he didn't modify anything. I rolled with my Cobra's in there for a while without hooking them up to be sure that I actually DID like them. I do.

nasty04mach1 · 04-30-2008, 11:29 PM

If you want to use the amber then yes you have to slice a new blub into the harness. I never used a blub in there. This should help you....
http://www.mustangworld.com/ourpics/...obralights.htm

yinks281 · 04-30-2008, 11:33 PM

Quote:

Originally Posted by nasty04mach1

If you want to use the amber then yes you have to slice a new blub into the harness. I never used a blub in there. This should help you....
http://www.mustangworld.com/ourpics/...obralights.htm

I've read but I'm too lazy to do it. If it doesn't make me go faster I don't really get too into it.

Bump for a good deal.

nasty04mach1 · 04-30-2008, 11:34 PM

Quote:

Originally Posted by yinks281

I've read but I'm too lazy to do it. If it doesn't make me go faster I don't really get too into it.

Bump for a good deal.

Same here I was too lazy LOL. Thanks buddy

Mark04Mach1 · 05-01-2008, 11:25 AM

Danm, too bad they wont work with my sequntial set up...good luck.

nasty04mach1 · 05-01-2008, 12:42 PM

Thanks

3150Mach1 · 05-01-2008, 06:54 PM

Quote:

Originally Posted by Mark04Mach1

Danm, too bad they wont work with my sequntial set up...good luck.

They will. Just plug the amber hole

Sublimemach · 05-01-2008, 08:43 PM

Quote:

Originally Posted by 03Mach150BP

They will. Just plug the amber hole

i think he means the wont be functional..

i searched everywhere and emailed numerous companies asking if you can have sequential AND the amber to work.

like having the amber blink on the turn signal and having the sequence go when you brake..

but it cant be done.

bullitt784 · 05-02-2008, 08:33 AM

Quote:

Originally Posted by SublimeMach

i think he means the wont be functional..

i searched everywhere and emailed numerous companies asking if you can have sequential AND the amber to work.

like having the amber blink on the turn signal and having the sequence go when you brake..

but it cant be done.

i'm sure someone with electrical prowess could find a way

nasty04mach1 · 05-02-2008, 03:33 PM

Nobody???? I can take the tint off if you do not want it!!! Make me an offer!!!! I need them gone

3150Mach1 · 05-02-2008, 10:22 PM

Quote:

Originally Posted by nasty04mach1

Nobody???? I can take the tint off if you do not want it!!! Make me an offer!!!! I need them gone

I think that would help. Also you would get more hits on them over on SVT.

nasty04mach1 · 05-03-2008, 01:05 AM

Quote:

Originally Posted by 03Mach150BP

I think that would help. Also you would get more hits on them over on SVT.

I have them on SVT. I didn't want to strip in case someone wanted them tinted. So that way they wouldnt have to pay for any tint.

nasty04mach1 · 05-04-2008, 01:59 AM

nobody?

04_Mach · 05-05-2008, 10:01 AM

If you still have them when I get my cams sold then, I'll most likely pick them up off you. Would you be willing to do 325 shipped??

nasty04mach1 · 05-05-2008, 01:00 PM

If I still have them. You can get them. But Yes I will take $325 shipped

04texasmach · 05-06-2008, 11:38 PM

Quote:

Originally Posted by bullitt784

i'm sure someone with electrical prowess could find a way

if i saw a schematic of the lights and the sequencer relays i bet i could get it to blink however you want to. ambers and all

swoop1156 · 05-07-2008, 03:03 PM

Yeah, you can get it done, it's just gonna be a wiring mess. Thought about it one day, but nah. I'm just going to make mine 6-bulb brakes.

nasty04mach1 · 05-07-2008, 03:58 PM

Well now that we know everything there to know about wiring. Nobody wants to buy these

. I am open to offers!!!!!

nasty04mach1 · 05-10-2008, 01:29 PM

I still have these. $300 SHIPPED!!!!!!!!!!!!!!!!!!!!!

04-30-2008, 03:57 PM	#1
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	F/S: 99-01 Cobra Tails I am selling my 99-01 Cobra tail lights. I always have them completely blacked out and if I am going to have them like that I might as well use the stock tail lights sale these and put that money to good use. The only time I had them tinted and showing the amber was when I first got them. I want to sell these and just put my stock ones back on. I can use the money to pay off some bills. The only thing about the lights is the outer most light housing has a dent in it on both sides. I got them from a buddy that had them tinted and he got a little too close with the heat gun. It is not that big of a deal to me. The only time you can tell is if you get up on them or if they are tinted. You cannot tell if they are untinted. You cannot tell in pictures as you can see from the many pictures I have posted of them on this site. I can leave them tinted for you or I can remove it. If you are going to tint them let me know and I can leave it on there so you do not have to buy any more tint. Other than the heat gun problem there is nothing wrong with them. They work perfect no cracks or anything. I will only take PayPal. I want to try and get $325 plus shipping. Thanks for looking and good luck!!! If you have any questions please send me a PM. BTW the tint is 20%. In this pic I circled where the dent is from the heat gun. __________________ '04 Mach gone but will be never forgotten 12/03/08

04-30-2008, 04:50 PM	#2
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: F/S: 99-01 Cobra Tails __________________ '04 Mach gone but will be never forgotten 12/03/08 Last edited by nasty04mach1; 04-30-2008 at 05:19 PM.

04-30-2008, 07:25 PM	#3
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: F/S: 99-01 Cobra Tails Somebody has to got be wanting some Cobra tails? __________________ '04 Mach gone but will be never forgotten 12/03/08

04-30-2008, 09:05 PM	#4
bullitt784 Registered User Join Date: Apr 2007 Location: miami, fl Posts: 732	Re: F/S: 99-01 Cobra Tails do you have the cobra harnesses? __________________ H&R, SLP, MGW, MSD, Kooks, MM, SOS, Steeda, FRPP, Moser, MT, NX

04-30-2008, 11:08 PM	#5
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: F/S: 99-01 Cobra Tails No I just used the stock harness. You do not have to have it to use them. __________________ '04 Mach gone but will be never forgotten 12/03/08

04-30-2008, 11:28 PM	#7
swoop1156 Parked again... Join Date: Jul 2006 Location: Pensacola, Florida Posts: 2,041	Re: F/S: 99-01 Cobra Tails I don't think he had the Amber hooked up if he didn't modify anything. I rolled with my Cobra's in there for a while without hooking them up to be sure that I actually DID like them. I do. __________________ Sold but not forgotten... 2004 Torch Red Mach 1 IUP / 5-Speed Mach #238576 Modifications \| Borla Stinger's \| Painted C&L Intake \| 15% Tint \| Powdercoated Valve Covers \| '01 Cobra Tails \| '04 Cobra Mirrors \| '01 Cobra Bumper \| '01 Bullitt Skirts \| FR500 Steering Wheel \| MGW Shifter \| 3/8" Spacer \| IAC Restrictor \| 17x9/10.5 Mach's \| 275/315 Vredestein's \| MM Subframe Connectors \| Tokico D-Spec's \| MM 4-Bolt C/C Plates \| H&R Super Sport's \| Build Number \| #6935 of 7182

04-30-2008, 11:29 PM	#8
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: F/S: 99-01 Cobra Tails If you want to use the amber then yes you have to slice a new blub into the harness. I never used a blub in there. This should help you.... http://www.mustangworld.com/ourpics/...obralights.htm __________________ '04 Mach gone but will be never forgotten 12/03/08

05-01-2008, 11:25 AM	#11
Mark04Mach1 No mames.... Join Date: May 2006 Location: Del Rio, Texas Posts: 2,449	Re: F/S: 99-01 Cobra Tails Danm, too bad they wont work with my sequntial set up...good luck. __________________ sold all my cars..

05-01-2008, 12:42 PM	#12
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: F/S: 99-01 Cobra Tails Thanks __________________ '04 Mach gone but will be never forgotten 12/03/08

05-02-2008, 03:33 PM	#16
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: F/S: 99-01 Cobra Tails Nobody???? I can take the tint off if you do not want it!!! Make me an offer!!!! I need them gone __________________ '04 Mach gone but will be never forgotten 12/03/08

05-04-2008, 01:59 AM	#19
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: F/S: 99-01 Cobra Tails nobody? __________________ '04 Mach gone but will be never forgotten 12/03/08

05-05-2008, 10:01 AM	#20
04_Mach Registered User Join Date: May 2008 Location: Virginia Beach, VA Posts: 33	Re: F/S: 99-01 Cobra Tails If you still have them when I get my cams sold then, I'll most likely pick them up off you. Would you be willing to do 325 shipped?? __________________ 2004 Screamin' Yellow Mach 1: FRPP 3:73's, 6 point roll cage, and a lot more to come.

05-05-2008, 01:00 PM	#21
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: F/S: 99-01 Cobra Tails If I still have them. You can get them. But Yes I will take $325 shipped __________________ '04 Mach gone but will be never forgotten 12/03/08

05-07-2008, 03:03 PM	#23
swoop1156 Parked again... Join Date: Jul 2006 Location: Pensacola, Florida Posts: 2,041	Re: F/S: 99-01 Cobra Tails Yeah, you can get it done, it's just gonna be a wiring mess. Thought about it one day, but nah. I'm just going to make mine 6-bulb brakes. __________________ Sold but not forgotten... 2004 Torch Red Mach 1 IUP / 5-Speed Mach #238576 Modifications \| Borla Stinger's \| Painted C&L Intake \| 15% Tint \| Powdercoated Valve Covers \| '01 Cobra Tails \| '04 Cobra Mirrors \| '01 Cobra Bumper \| '01 Bullitt Skirts \| FR500 Steering Wheel \| MGW Shifter \| 3/8" Spacer \| IAC Restrictor \| 17x9/10.5 Mach's \| 275/315 Vredestein's \| MM Subframe Connectors \| Tokico D-Spec's \| MM 4-Bolt C/C Plates \| H&R Super Sport's \| Build Number \| #6935 of 7182

05-07-2008, 03:58 PM	#24
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: F/S: 99-01 Cobra Tails Well now that we know everything there to know about wiring. Nobody wants to buy these . I am open to offers!!!!! __________________ '04 Mach gone but will be never forgotten 12/03/08

05-10-2008, 01:29 PM	#25
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: F/S: 99-01 Cobra Tails I still have these. $300 SHIPPED!!!!!!!!!!!!!!!!!!!!! __________________ '04 Mach gone but will be never forgotten 12/03/08

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)