|
|
Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here! |
|
Thread Tools | Display Modes |
06-23-2011, 11:14 PM | #1 |
Registered User
Join Date: Apr 2004
Location: St. Louis
Posts: 580
|
Need a Stock Temp Gauge!
Anybody have a stock Mach 1 temperature gauge to sell? Mine went AWOL and won't sweep, just stuck in the middle. If you refit with aftermarket gauges and want to sell your gauge(s) please let me know ASAP. I have an 04 with manual transmission if it even makes a difference. Thanks, Evan ebevirt@sbcglobal.net
__________________
Keep on running |
06-23-2011, 11:21 PM | #2 |
Registered User
Join Date: Apr 2010
Location: Calgary, Alberta, Canada
Posts: 94
|
Re: Need a Stock Temp Gauge!
i have an entire cluster from a manual that i bought just for the silver lens, so it would be just the electronic and actual gauge face, no lens.
if this is what you need make an offer thanks |
06-23-2011, 11:33 PM | #3 |
Registered User
Join Date: Apr 2004
Location: St. Louis
Posts: 580
|
Re: Need a Stock Temp Gauge!
Hi, I wouldn't need the lens. Is the instrument cluster made so I can just remove the temp gauge, or is it all a single sealed up unit... I've never had mine out so I honestly don't know. I really don't need the whole unit if it can be separated, but let me know if you don't want to part out the unit. Thanks, Evan
__________________
Keep on running |
06-24-2011, 12:05 AM | #4 | |
Registered User
Join Date: Apr 2010
Location: Calgary, Alberta, Canada
Posts: 94
|
Re: Need a Stock Temp Gauge!
Quote:
this cluster below is from a GT but the mach 1, one should look exactly the same (this is the electronic part) |
|
06-24-2011, 12:37 AM | #5 |
Registered User
Join Date: Oct 2010
Location: Arizona
Posts: 202
|
Re: Need a Stock Temp Gauge!
also if you swap out the cluster your going to have to "marry" the cluster to the PCM'' The 05-06 cars had a issue with the lil motors.. I think you can buy them at radio shack or some electronics store.. there is a write up on s197F
|
06-24-2011, 02:07 PM | #6 |
Registered User
Join Date: Apr 2004
Location: St. Louis
Posts: 580
|
Re: Need a Stock Temp Gauge!
OK, what I still need to know is can I remove just the temp gauge from the cluster, or is that un-doable? How much do you want for the whole unit?
__________________
Keep on running |
06-24-2011, 10:31 PM | #7 | |
Registered User
Join Date: Apr 2010
Location: Calgary, Alberta, Canada
Posts: 94
|
Re: Need a Stock Temp Gauge!
Quote:
if you decide that you want what i have PM me, it will look exactly like the first pic i posted except its from a manual mach 1. thanks |
|
06-24-2011, 11:17 PM | #8 |
Registered User
Join Date: Feb 2006
Location: Rapid City, SD
Posts: 297
|
Re: Need a Stock Temp Gauge!
Just asking but have you tried the sending unit its self.
Turn the car on and take the wire off the sending unit and ground it out, it should peg out, then you can narrow it down from the sending unit, wireing or the cluster itself. All else fails, if it sticks when the key is off, beat the dash a little to see if it will break loose. |
07-06-2011, 08:56 AM | #9 | |
Registered User
Join Date: Apr 2004
Location: St. Louis
Posts: 580
|
Re: Need a Stock Temp Gauge!
Quote:
__________________
Keep on running |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|